Type 301 is an austenitic chromium-nickel stainless steel. This alloy is non- magnetic in the annealed condition, but becomes magnetic when cold worked. High strength and excellent corrosion resistance make Type 301 Stainless Steel useful for a wide variety of applications. Typical uses include aircraft structural parts, trailer bodies, diaphragms, utensils, architectural and automotive trim, automobile wheel covers, roof drainage products, tableware, storm door frames, conveyor belts, sinks, subway cars and appliances
Type 304/304L is the modern version of "18-8" stainless steel containing approximately 18% chromium and 8% nickel and is the most commonly specified stainless steel used throughout the world. Type 304/304L is a versatile, general purpose stainless steel with good resistance to atmospheric corrosion, and to many chemicals and food and beverages. These grades can be specified in the annealed condition where they have very good formability. Higher nickel versions can be specified to enhance multi-stage deep drawing characteristics. Higher strength, cold-worked conditions can also be specified for Type 304/304L for spring type applications. Type 304/304L is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold working.
Type 316/316L is a chromium nickel austenitic stainless steel containing molybdenum. The molybdenum addition enhances the corrosion resistance over that of 304/304L in halide environments as well as in reducing acids such as sulfuric and phosphoric acid. Type 316L can be dual certified as 316 when the composition meets the lower carbon limit of 316L and the slightly higher strength levels of 316. Type 316L should be specified for welded applications as the low carbon version eliminates chromium carbide precipitation and enhances the corrosion resistance in the as-welded condition.